Product introduction of thermal insulation mortar mixing station
The equipment of thermal insulation mortar production line can meet the production needs of dry powder mortar, dry powder material and dry powder adhesive required by different surnames of Manchu nationality, such as putty powder, dry powder coating, masonry mortar, plastering mortar, mortar required for thermal insulation system, decorative mortar, etc., and has the advantages of small land occupation, less investment, quick laughter and simple operation.
When the machine is working and mixing, the materials in the machine are subjected to the action of two rotors in opposite directions, and the pulp leaves and animal feed rotate anticlockwise along the inner wall of the machine slot. On the one hand, the animal feed is turned left and right. In this area, the bucket can make the material float upward in the weightlessness area regardless of the shape, size and density of the material In this way, the materials can be continuously rotated and sheared alternately in the slot, so as to achieve the effect of quick molding, soft mixing and even mixing
Product pictures of thermal insulation mortar mixing station
Product characteristics of thermal insulation mortar mixing station
1. The machine is a horizontal cylinder, with two-layer spiral belt structure inside and outside. It has stable operation, acceptable quality, low noise, long service life, extensive installation and maintenance, and a variety of agitator structures. It is a multifunctional mixing equipment with extensive use.
2. It has high mixing speed and high mixing uniformity. It is especially sticky. Scraper can be installed on the spiral belt to adapt to thick and paste mixing.
3. Under the mixing requirements of different materials (special materials must be clear after each mixing), the jacket type with different spiral belt structure can be heated and dried.
4. Special atomizing liquid, with special nozzle.
5. The horizontal body can also be equipped with a movable door for users' clarity.
Product advantages of thermal insulation mortar mixing station
1. Bucket elevator is selected for raw material transportation, which has high feeding speed and low damage rate.
2. The inlet and outlet were optimized and improved for many times, and the sealing performance was improved.
3. The diaphragm running belt is changed from the original gear to the rubber wheel, which can start smoothly and run smoothly. The noise of the machine is very low during operation.
4. The problem of dust emission in production is further reduced by adding multi position dust removal.
5. The thermal insulation mortar mixer has been optimized and improved to make the inner structure of the cylinder inside folded. The volume of the cylinder is reduced, the mixing time is shortened, the output of the whole set of equipment is raised, and the material produced will not produce segregation. It reduces the load of auxiliary parts and prolongs the service life of the equipment.
6. The finished product warehouse was improved to further improve the product uniformity.
7. The volume packer is used to replace the traditional weight packing machine. The volume packer adopts the way of electronic control cylinder action and volume measurement, with accurate measurement and long service life. At the same time, the problems of damage and slow packing speed caused by traditional packaging methods (screw, impeller, etc.) are solved.
8. The electric control system starts the main engine by means of pressure, which makes the starting stable and prolongs the service life of the motor.
9. The layout of the whole production line is optimized. The layout is close and compact. The production process is simplified and the production efficiency is further improved.
Working principle of thermal insulation mortar mixing station
1. Batching device: it is composed of hopper weighing scale, feeding dragon, discharging device, micro material adding device and computer control system. It can automatically measure plutonium and raw materials according to the formula, reduce labor intensity and environmental pollution, and maintain the product quality of putty powder.
2. Mixer: the Wuhu shaft mixer for thermal insulation mortar brick is used to break the phenomenon of vitrified micro beads and perlite from the root benzene. Youqi is the built-in guide plate in the mixer, which not only plays the role of material mixing and guiding, but also plays the role of kneading and kneading the materials, so that the materials can be mixed evenly and quickly.
3. Packing machine: open pocket and valve pocket. Putty powder is often used by valve pocket packing machine, because the valve pocket packing needs to be sewn, and it can be operated by one person. However, this packaging machine is suitable for packing light materials, and the benzene formation of the bag is slightly draft, but the packing speed is fast. The open bag packing scale can pack a variety of materials, but the opening needs to be sewn after bagging. Relatively speaking, the benzene generation of the bag is slightly lower (the bag can be recycled), but the packaging speed is slightly slow. Compared with the valve pocket packing machine, the operator needs one more person.
4. Dust collector: used to recover the dust in the dry mortar production line, which is conducive to environmental protection. Generally, it is set on the top of cement bin and at the conveying port of elevator. Recommended equipment: bag type pulse dust collector
5. Conveying and lifting structure: the material conveying modes used in the silo of production line include: horizontal conveying and vertical conveying. Screw conveyor can be used for horizontal conveying, and bucket elevator is generally used for vertical conveying.
Technical parameters of thermal insulation mortar mixing station
| component|| model|| power|
| Bucket elevator|| TDTG36/28|| 4.0kW|
| Twin shaft paddle mixer|| SLHS2.0|| 18.5kW|
| Finished product warehouse|| 2.5m³|| 7.5kW|
| Pulse precipitator|| TYDMC.18|| 4kW+0.75Kw|
| Air compressor|| W-0.6|| 4kW|