张家界附近想过夜电话联系

 Contact information in the upper right corner

What preparation should be done before the installation of cement rotary kiln?

Author: changdeli Machinery Factory 03-23:23, 2020 Views: 11

    Cement rotary kiln However, in general, a lot of people need to know what kind of equipment is used to make a complete preparation of the brick by using a rotary roller After all, doing these preparations in advance can ensure the better use of the whole equipment.

Familiar with drawings

    Before the full screen installation of cement rotary kiln, it is recommended that you should be familiar with the drawings, because this kind of equipment itself is a large-scale production equipment. Therefore, it is necessary to know the drawing situation in advance before installation, and master the specific parameters of the whole equipment through the equipment drawing, so as to fully understand the specific position of each equipment or drawing During the installation process, we must do a comprehensive guarantee for their position or the entire benchmark line. We should know the parts between the various plants through the layout plan, and understand the water point of the whole equipment or the layout line of the road, and know the location of the opposite party of the equipment. In this way, we can determine the transportation route and determine Assembly and work site, determine the site of the tool room installation and the location of temporary power supply.

Transportation of lifting equipment

    In the process of comprehensive installation of cement rotary kiln, if it is lifting equipment, the advantages and disadvantages of the whole project should be considered when transporting or installing, and the speed of all the progress or the level of cost should be considered. These all have direct views. We should choose the most appropriate weight and consider the means of transportation or the whole Machinery and appliances, because this product is basically on the production line, the overall size of the equipment is relatively large, and the tonnage is also relatively serious, so it is required to use transport equipment. Therefore, the whole equipment has the development trend of becoming larger and larger. When selecting the crane, we must make clear the rhythm of the maximum tonnage, and in this, we must understand the lifting height To solve the radius of rotation or the weight of the whole place, the whole equipment should also be considered. Only in this way can the crane be convenient.

Personnel requirements

Cement Rotary kiln equipment Personnel are required before the construction is ready to start, because the period of this kind of equipment is relatively short when it is directly constructed, and there are even more process equipment that can arrange them all on the high-rise. It will increase the difficulty of operation invisibly, so the personnel are required to have professional operation ability.